Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Fenders
$9.99
Versatile, flexible, front fender for mountain bikes. Fits virtually any fork with arch in front and any tire diameter with width up to 3.0".
- Slop Stop - The Slop Stop leading edge catches mud and water the tire picks up and flings forward. Catching this slop at the tire helps prevent it from getting blown into your face!
- Seal Shield - The Seal Shield drop section wings provide an effective barrier to trail debris and muck, helping keep your fork seals cleaner longer.
- Flop Stop - The Flop Stop rear section's carefully engineered fold provide stiffness. This stiffness prevents the fender from contacting the front wheel and getting sucked into the fork, stopping you in a hurry! The folds also contour the fender around the tire making it a better mud guard.
- Includes 4 reusable zip ties
- Weight: 27g
$27.99
Easy-to-install front fender for your fat bike.
CONSTRUCTION
• Virtually unbreakable polypropylene body
MOUNTING SYSTEM
• Adjustable rubber straps mount to down tube
•100% recyclable; ships and merchandises as a flat sheet and snaps onto the included down tube bracket
• Hardware included
• Weight: 99 grams / 3.5 ounces
$34.99
An innovative adapter that adds eyelets to any QR-equipped bike, facilitating the mounting of traditional fenders to bicycles lacking front and rear eyelets.
CONSTRUCTION
• Lightweight red anodized aluminum
MOUNTING SYSTEM
• Mount to quick release skewer
ADDED BENEFIT
• A quick and easy solution to make fenders fit
• Set of four
$74.99
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics.
Weight: 652 g / 1.44 lbs (pair)
Construction
- Forged alloy RAINRUNNER Q/R mounts
- 3M Reflex rear reflectivity
- Virtually unbreakable Techniflex body
- Stainless steel stays
- Safety front stays
Mounting System
- Below: Mount to Quick-Release skewers via included AXLE-RUNNERS
- Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties
Added Benefit
- Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets
- 3M Reflex rear logo enhances visibility
- Support stays spaced for maximum stiffness and frame compatibility
- Front fenders equipped with safety stays to protect against objects becoming lodged in wheel
- Sold pre-assembled for quick mounting
$74.99
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics.
Weight: 752 g / 1.66 lbs (pair)
Construction
- Forged alloy RAINRUNNER Q/R mounts
- 3M Reflex rear reflectivity
- Virtually unbreakable Techniflex body
- Stainless steel stays
- Safety front stays
Mounting System
- Below: Mount to Quick-Release skewers via included AXLE-RUNNERS
- Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties
Added Benefit
- Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets
- 3M Reflex rear logo enhances visibility
- Support stays spaced for maximum stiffness and frame compatibility
- Front fenders equipped with safety stays to protect against objects becoming lodged in wheel
- Sold pre-assembled for quick mounting
$74.99
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics.
Weight: 606 g / 1.34 lbs (pair)
Construction
-Forged alloy RAINRUNNER Q/R mounts
- 3M Reflex rear reflectivity
- Virtually unbreakable Techniflex body
- Stainless steel stays
- Safety front stays
Mounting System
Below: Mount to Quick-Release skewers via included AXLE-RUNNERS
Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties
Added Benefit
- Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets
- 3M Reflex rear logo enhances visibility
- Support stays spaced for maximum stiffness and frame compatibility
- Front fenders equipped with safety stays to protect against objects becoming lodged in wheel
- Sold pre-assembled for quick mounting
$94.99
Ride in any weather
The Bontrager NCS fender is everything you want in a fender. It installs in seconds, is available in a variety of sizes to fit various bikes, and offers full coverage to keep you dry. The no-cut design includes everything you need for easy installation and it even comes with an integrated Blendr rear light mount.
Product details
- Fully assembled fenders that install in minutes
- Integrated rear Blendr light mount for use with Bontrager Flare lights
- No-cut struts allow quick strut adjustment for proper tire clearance
- Double-back strut on rear fender adds support and stability
- Made of lightweight yet super-durable polycarbonate
- Stainless steel hardware resists rust
- Four sizes available to accommodate most bike and tire configurations
$174.99
It's fender season
Our patented "No-Cut-Strut" bicycle fenders allow quick and simple installation to keep you dry and your bike clean. The premium aluminum construction provides added reliability and less vibration, while the sleek adjustable arms allow ultra-precise placement, so you can tailor the fit faster than you can pull a shot of espresso.
Patented No-Cut-Strut alloy fenders provide durability and quick, easy installation.
- Fully assembled fenders that install in minutes with only two tools
- Durable no-cut alloy struts allow quick adjustment for proper tire clearance
- Made of premium aluminum for added durability and reduced flexing and vibration
- Double-back strut on rear fender adds support and stability
- Stainless steel hardware
$84.99
FUNCTIONAL. FASHIONABLE. FENDERS.
No one wants that wet stripe on their back.
Keep yourself and your gear clean and dry with a stylish fender.
PRODUCT DETAILS
- Original replacement fenders for Electra Townie bikes
- Color matched for direct compatibility
$94.99
Functional. Fashionable. Fenders.
No one wants that wet stripe on their back.
Keep yourself and your gear clean and dry with a stylish fender.
Details:
- Fenders intended for warranty and service use.
- Original equipment replacement fenders for Electra bikes
- Color matched for direct compatibility
- Sold in pairs
- Includes struts
$94.99
Functional. Fashionable. Fenders.
No one wants that wet stripe on their back.
Keep yourself and your gear clean and dry with a stylish fender.
Details;
- Fenders intended for warranty and service use.
- Original equipment replacement fenders for Electra bikes
- Color matched for direct compatibility
- Sold in pairs
- Includes struts
$94.99
Functional. Fashionable. Fenders.
No one wants that wet stripe on their back.
Keep yourself and your gear clean and dry with a stylish fender.
Details:
- Fenders intended for warranty and service use.
- Original equipment replacement fenders for Electra bikes
- Color matched for direct compatibility
- Sold in pairs
- Includes struts
$59.99
- Made of resistant chromoplastic
- Stainless steel bracket and stays
- Pre-assembled for fast and easy installation
$19.99 - $24.99
- Lightest and most versatile MTB mudguard available
- Uses hook and loop Velcro straps to attach to the bridge and lower legs
- Compatible with forward and double bridge fork designs and all wheel sizes
$19.99 - $24.99
Meet the brand new, fantastic, feature packed Face Fender!
Lightweight, discreet, and very effective, the Face Fender is a simple front mud guard for mountain bikes, made from 100% recycled plastic.
SHIZZLE SHIELD
- Integrated into the Face Fender is the Shizzle Shield, which, when folded toward the tyre, stops pretty much anything from being flung forward and hitting you in the mush.
NO MORE ZIP-TIES
- No more zip-ties! The fender is profiled to hold the Velcro fastener without needing zip-ties or anything else.
$45.00
The new EVO fender was designed around the latest FOX 36 and 38 forks, to avoid the problem of the crown hitting the mudguard at full compression.
The Shorty EVO Ziptie fender attaches directly to the fork with the supplied zip-ties. Compatible with most forks other than models with reverse arch.
- Total length: 390mm (Rr extension 255mm, Fr extension 105mm)
- More mud clearance
- No more crown fouling at full compression
- Designed and made in the UK from recycled PP
- Strong enough for DH racing at the highest level
- 100g
$47.00
Following the tried and tested rear Mudhugger design, will fit most bike frame seat stays and is designed for tires up to 50mm wide.
The Rear GravelHugger is designed to be attached to the bike with zip ties as these afford the most secure way to fitting. However, it can also be attached utilizing hook and loop straps (sold separately), making removing and refitting easier.
- Suitable for 700c and 650b wheels, Max tire width 50mm (depending on wheel/tire combination)
- Designed and made in the UK from 100% recycled polypropylene
- Includes Helitape and zip-ties
- Length: 560mm
- Width: 55mm
- Weight: 200g
$47.00
Initially designed to overcome the problem of fitting mudguards to a bike with a dropper seatpost, the Rear Mudhugger works well on all bikes, providing they have disc brakes. Attaching it to the seat stays overcomes all of the problems normally associated with rear mudguards. They do not move out of line, get in the way when getting on or off the bike, do not foul rear suspension travel, and are robust enough to take the rough and tumble of modern trail riding demands.
- 560mm long x 95mm wide
- Fits wheel sizes: 26" full suspension and hardtail bikes, and 27.5" (650B) hardtails
- Includes frame tape and 6 zip-ties
- Weight: approx 208g (w/o fittings)
$51.00
Following the tried and tested tire-hugging design of our MTB Mudhuggers, the GravelHugger is designed to fit most fork + wheel + tire (up to 50mm wide) combos.
To reduce single-use plastic waste, and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Zip ties (sold separately) can be utilized if you'd prefer to fit and leave them on at all times.
- Suitable for 700c (Max tire width 42mm) and 650b wheels (Max tire width 50mm), depending on wheel/tire/fork combination
- Designed and made in the UK from 100% recycled polypropylene
- Includes Helitape and nitrile O-rings
- Length: 490mm
- Width: 60mm
- Weight: 75g
$55.00
The FRX (Front Race) fender was designed with the help of World Cup and Enduro World Series riders wanting max mud and spray protection with zero faff.
Measuring 435mm in length the FRX provides awesome mud/spray stopping performance without breaking the bank.
- Fits all wheel sizes: 26", 27.5", 27.5+" and 29" wheels with tires up to 3 inches wide on a 'boost' fork
- Designed and made in the UK from 100% recycled black polypropylene
- Weight: 78g
$63.50
The new EVO bolt-on fender is designed around the latest FOX 36 and 38 forks, to avoid the problem of the crown hitting the mudguard at full compression (minimum Fork Offset: 44mm).
Fender bolts directly to the back of the fork brace. Supplied with rubber pads, bolts, washers and hex key to install to your FOX forks.
Compatible with older (2017) onwards FOX 34 & 36 forks which have bolt holes in the brace.
Also compatible with the fork brands below (separate adapter kits are required):
- Rock Shox Zeb
- Rock Shox Recon Gold or Silver 35
- DVO Onyx SC, Sapphire, & Diamond
- Ohlins RXF 38 (2019+) & DH
- Total length: 515mm (Rr extension 330mm, Fr extension 185mm)
- More mud clearance
- No more crown fouling at full compression
- Stiffer, optimum length, not too short, no longer than needed
- Designed and made in the UK from recycled PP
- 125g
$63.50
The new Shorty EVO bolt-on fender is designed around the latest FOX 36 and 38 forks, to avoid the problem of the crown hitting the mudguard at full compression (minimum Fork Offset: 44mm).
Fender bolts directly to the back of the fork brace. Supplied with rubber pads, bolts, washers, and hex key to install to your FOX forks.
Compatible with older (2017) onwards FOX 34 & 36 forks that have bolt holes in the brace.
Also compatible with the fork brands below (separate adapter kits are required):
- Rock Shox Zeb
- Rock Shox Recon Gold or Silver 35
- DVO Onyx SC, Sapphire, & Diamond
- Ohlins RXF 38 (2019+) & DH
- Total length: 390mm (Rr extension 255mm, Fr extension 105mm)
- More mud clearance
- No more crown fouling at full compression
- Stiffer, optimum length, not too short, no longer than needed
- Designed and made in the UK from recycled PP
- 100g
$80.00
Building on the award-winning, tried and tested Rear Mudhugger design, the new MK2 fender has added 3 significant improvements:
1. Now attaches with reusable velcro straps to make fitting and removing a matter of seconds
2. Where the fender 'sits' on the seatstays we have incorporated rubber inserts which aid grip and improves damping
3. A new push fit BB extension piece, to protect the BB area from debris build up. This has been designed to be as thin as possible so that it can be easily trimmed to suit most bike rear triangle designs
The MEDIUM version is designed for bikes with a seatstay angle from 34 degrees down to 27 degrees. Can be fitted to 'most' bikes with disc brakes, even with external cables and hoses.
- 690mm long x 105mm wide
Comes supplied with:
- x2 helitape sheets
- x4 velcro straps
- x2 rubber damping strips
- x1 BB extension (230mm long x 80mm wide)
- Designed and made in the UK from recycled polypropylene
- 280g (w/o fittings)
$13.99
- Universal mounting on downtube
- Easy assembly by rubber straps
- Dual injection construction with polypropylene and rubber
- Larger protection
$19.99
- Can be used on 24'' or 26'' wheels
- Designed specially for use with V-brakes and bike with suspension
- Mounting kit included
- Adjustable L shape steel bracket for rear and front mudguard
- Made of shock resistant polymer
- 100% recyclable material
- Reflective safety stickers mounting
$19.99
- A universal, quick-mount rear mudguard, that fits all seatpost diameters (25 to 32mm)
- Quick and easy to install
- Tool-free
- Reflective safety stickers
- Shock-resistant polymer
- 100% recyclable material
$23.99
- Fits tubes from Ø27 to 35mm
- Fits 20" to 24" wheels
- Mudguard section of 55mm
- Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes
- Expander range on front and rear for perfect fitting
- Includes long and short clamp depending on the space needed to clip it to the frame
- Adjustable L shape steel bracket for rear and front mudguard
- Mounting kit included
$41.99
- Fits tubes from Ø27 to 35mm
- Fits 26" to 29" wheels
- Mudguard section of 55mm
- Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes
- Expander range on front and rear for perfect fitting
- Includes long and short clamp depending on the space needed to clip it to the frame
- Adjustable L shape steel bracket for rear and front mudguard
- For an extra secure mounting of the rear mudguard we also offer a Ø 3 mm stainless steel U-stay
- Mounting kit included
$23.00 - $31.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation, so you can get to the trailhead sooner and shred with much less mess.
- Works on all RockShox fork models
- Comes with 4 zip ties for immediate installation
- Offered in a wide range of colors that match RockShox's fork decal packs
- Deep side skirts protect stanchions and dust seals from rocks and debris
$23.00 - $31.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess.
- Works on all RockShox fork models
- Comes with 4 zip ties for immediate installation
- Offered in a wide range of colors that match RockShox's fork decal packs
- Designed specifically for RockShox forks
- Deep side skirts protect stanchions and dust seals from rocks and debris
- Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
Page 1 of 4
Next page