Tools

White Lightning's Easy Clean Tire Brush is the perfect solution for cleaning dirty tires. It removes tread grit, which improves traction, helps to prevent flats, and minimizes the mess when storing or transporting your bike. The adjustable Easy Clean Tire Brush fits every shape and size of tire. You can also use it wet or dry, whether you just need to knock some dirt off or really get in there and give 'er a good scrubbing.

The Preset Torque Wrench provides secure adjustments while preventing damage from over-tightening. THE RIGHT TOOL FOR THE JOB High-performance bicycles require precision during setup and adjustment. PRODUCT DETAILS - Tools are pre-set to 6.8Nm - Check component tightening specifications before using - Keys are non-removable

Everything you need Be prepared for roadside adjustments and minor repairs with the Trek Comp Multi-Tool. This simple tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smooth. Product details - 2, 2.5, 3, 4, 5, 6, and 8 hex wrenches along with Phillips and flat-head screwdrivers, and T25 - Alloy sides for a sleek lightweight design

For Shimano® and some of Shimano®’s disc brake system, SRAM®?SunRace®, SunTour®, Chris King®, and other cassette lockrings. With a center pin. Use with 24mm spanner.

- High grade steel screwdriver - Ergonomically-designed grip

Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!

Shimano Genuine disc brake bleed Funnel unit for BL type MTB brake lever (M5 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below

To adjust preload on Hollowtech II cranksets

Confident braking means you can go faster. Enough said. SRAM's Disc Brake Bleed Kit is compatible with SRAM XO, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following: - 2 syringes/fittings - Bleed blocks - Torx tool - Crow's foot - Bleeding Edge Fitting

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

- 50 hour service kit for Deluxe and Super Deluxe rear shocks - Includes air can seals, piston seal, and glide rings

- RockShox, 11.4118.038.000, Service kit, Monarch B1RL C1 R, RT, RT32014+

RockShox Volume Reducer Kits

- 200 hour / 1 year service kit for Super Deluxe RT3 A1 rear shocks - Includes air can seals, piston seal, glide rings, IFP seals, reservoir seals

M30 BB Tool 3/8" Socket Style, Pair

4 piece brush set for every part of your bike has that showroom ready finish! Brush handles are made from Beech wood with a wax coating for durability. Set consists of: 1 x bog brush 1 x detail brush 1 x drivetrain brush 1 x tyre brush

A worn bicycle chain can cause poor shifting and expensive drivetrain damage. The Park Tool CC-4.2 Chain Checker is a drop-in gauge that measures chain wear accurately. It contacts the chain in three places, eliminating guesswork. Compatible with 5 to 13-speed and single-speed chains, it indicates wear at 0.5%, 0.75%, and 1.0%, matching manufacturer replacement recommendations. - Measures bicycle chain wear accurately, preventing expensive drivetrain damage - Laser-cut design contacts the chain at three points, providing quick and precise wear measurement - Compatible with 5 to 13-speed derailleur chains and single-speed chains - Indicates chain wear at 0.5%, 0.75%, and 1.0%, aligning with manufacturer recommendations for replacement

The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

Designed and built to remove and install the direct mount lockring that retains front chainrings found on some Specialized, Cannondale and FSA modular cranks. - Fits chainring of Specialized, Cannondale and FSA - For lockrings with 47–48mm outside diameter and 4 or 8 notches - Fits both 4 notch (FSA and Cannondale) and 8 notch (Specialized) lockrings - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - Constructed of 4140 heat-treated steel and plated for long life

Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!

Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

Park Tool's CTP-4K includes four replacement chain tool pins and one 5/32" ball bearing. To replace the chain tool pin, unscrew the cap, and pull out the old pin. Use care not to lose the ball bearing beneath the pin. Install the new pin and replace the cap. Works with the CT-4.3, CT-4.2, CT-4, and CT-11

Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver. - Works on 5- to 12-speed road and mountain bike cassettes and freewheels - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel / Cassette Lockring Tools - Features hardened pins to keep the chain in place

• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)

The EDC PLUG KIT is the perfect addition to the EDC tool system. The tire plug Jabber Tool threads directly into the EDC carrier (SOLD SEPARATELY). The Jabber Tool and bacon strips store perfectly within the small EDC capsule ready for race day deployment.

- The EDC (Everyday Carry) tool contains essential trailside tools and can be stored in your steerer tube/stem or EDC pump for easy access. Plug kit (OU9505) can be added to fix punctures quickly - Updated EDC tool is easier to remove from storage, has an updated, more durable steel chain breaker and stronger steel spoke keys - Multi-tool features: 2,3,4,5,6,8 hex keys, T25 Torx, flathead screwdriver and EDC top cap tool. Ultra compact and super lightweight (58g) - Tire lever/chain breaker also features 0, 1, 2 & 3 spoke keys, Presta valve core remover & spare rotor bolt - Carrier features: spare quick link storage and ability to thread in a 12,16 or 20g CO2 cartridge OR a sealed storage capsule (small and large included) - Small storage capsule stores the jabber and preloaded bacon strip keeping it stickier for longer and can be installed inside of large capsule for separating items. EDC tool with small storage capsule is small enough to fit inside 70cc pump - EDC tool with large storage capsule fits inside 100cc pump as well as steerer tube storage options - Backwards compatible with all EDC V1 tool storage options - Steerer inner diameter must be between 24.25mm—24.80mm (gauge included) - 130g total weight - Third party online sales are strictly prohibited by manufacturer

- Featuring all five Muc-Off brushes in a handy storage bag - Claw brush ideal for chain, cassette and sprocket - Detailing brush ideal for tight areas such as suspension mounts or fork crowns - Soft washing brush ideal for your bike frame and wheels - Wheel and component brush ideal to clean rim and spokes with ease - Two-prong brush ideal to reach hard-to-shift dirt on your components

Lezyne's 3-Way Spoke Wrench packs three frequently used spoke wrench sizes into the palm of your hand. It features CNC-machined wrench faces for precise tool engagement of each 3.22, 3.30, and 3.45 size.

- Easy-to-use chain breaker tool - Reversible pin for longer tool life - Replaceable pin - Used for single speed to 11 speed chains - Chain Cutting Tool for single speed up to 11 speed. One for ALL. - Reversible Pin & One Additional Replacement. Total Equal to 4 Sets of Pins - Ergonomic Handle