Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

e*thirteen by The Hive Chain Guide Idler Pulley
$23.99
- Service parts for E-13 chainguides - Fits: 06+ single ring guides
e*thirteen by The Hive Chain Guide Upper Slider Kit
$23.99
- Service parts for E-13 chainguides
e*thirteen by The Hive Chain Guide Lower Slider Kit
$25.99
- Lower slider replacement parts for E-13 chainguides
e*thirteen by The Hive ISCG-05 to BB Adapter Plate
$31.99
- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets
e*thirteen by The Hive LG1 EN Plus 27.5 Tubeless
$74.99
LG1 EN Plus Tire from e*Thirteen. - Tire Intended Use: Mountain - ISO Diameter: 584 / 650b / 27.5" - ISO Width (mm): 60 mm - Labeled Size: 27.5 x 2.35 - Tire Bead: Folding - Tire Diameter: 27.5" - Tire Type: Tubeless Ready Clincher - Weight: 980g - Weight (oz): 34.5 - TPI: 72 - PSI: 50
e*thirteen by The Hive TRS Plus 27.5-inch
$74.99
The TRS Plus tire utilize the same tread pattern as previous versions, but have been reengineered with the addition of tapered Apex inserts designed into the tire, increasing grip under cornering and braking, while decreasing rolling resistance. - Aggressive tread pattern with a structural, angled base on the side knobs to control tire roll under high-speed cornering - Sipes are positioned to provide confident transitions from straight lines to cornering and confident braking traction - Ramped, shorter center knobs keep TRS tires rolling fast - Single-ply design with slow rebound tacky rubber throughout the tire - Tubeless-ready design
e*thirteen by The Hive TRS Plus 29-inch
$74.99
The TRS Plus tire utilize the same tread pattern as previous versions, but have been reengineered with the addition of tapered Apex inserts designed into the tire, increasing grip under cornering and braking, while decreasing rolling resistance. - Aggressive tread pattern with a structural, angled base on the side knobs to control tire roll under high-speed cornering - Sipes are positioned to provide confident transitions from straight lines to cornering and confident braking traction - Ramped, shorter center knobs keep TRS tires rolling fast - Single-ply design with slow rebound tacky rubber throughout the tire - Tubeless-ready design
e*thirteen by The Hive LG1 Plus 27.5-inch
$79.99
The LG1 Plus tire share the same tread as the TRS tire, in a downhill-friendly dual-ply design. Tapered Apex inserts designed into the tire, increasing grip under cornering and braking, while decreasing rolling resistance. - Aggressive tread pattern with a structural, angled base on the side knobs to control tire roll under high-speed cornering - Sipes are positioned to provide confident transitions from straight lines to cornering and confident braking traction - Ramped, shorter center knobs keep LG1 tires rolling fast - Dual-ply design with slow-rebound tacky rubber throughout the tire - Tubeless-ready design
e*thirteen by The Hive TRS Race 27.5-inch
$84.99
The TRS Race tire utilize the same tread pattern as previous versions, but have been reengineered with the addition of tapered Apex inserts designed into the tire. Combined with a layer of woven aramid reinforcement to protect against sidewall cuts and punctures, increasing grip under cornering and braking, while decreasing rolling resistance. - Aggressive tread pattern with a structural, angled base on the side knobs to control tire roll under high-speed cornering - Sipes are positioned to provide confident transitions from straight lines to cornering and confident braking traction - Ramped, shorter center knobs keep TRS tires rolling fast - Race tire features a single-ply design with slow rebound tacky rubber center tread, with high-tack rubber on side knobs - Tubeless-ready design
e*thirteen by The Hive TRS Race 29-inch
$84.99
The TRS Race tire utilize the same tread pattern as previous versions, but have been reengineered with the addition of tapered Apex inserts designed into the tire. Combined with a layer of woven aramid reinforcement to protect against sidewall cuts and punctures, increasing grip under cornering and braking, while decreasing rolling resistance. - Aggressive tread pattern with a structural, angled base on the side knobs to control tire roll under high-speed cornering - Sipes are positioned to provide confident transitions from straight lines to cornering and confident braking traction - Ramped, shorter center knobs keep TRS tires rolling fast - Race tire features a single-ply design with slow rebound tacky rubber center tread, with high-tack rubber on side knobs - Tubeless-ready design
e*thirteen by The Hive LG1 Race 27.5-inch
$89.99
The LG1 Race tire shares the same tread as the TRS, in a downhill-ready dual-ply design. Tapered Apex inserts designed into the tire, combined with a layer of woven aramid reinforcement to protect against sidewall cuts, increasing grip under cornering and braking, while decrease rolling resistance. - Aggressive tread pattern with a structural, angled base on the side knobs to control tire roll under high-speed cornering - Sipes are positioned to provide confident transitions from straight lines to cornering and confident braking traction - Ramped, shorter center knobs keep LG1 tires rolling fast - Race tire features a dual-ply design with slow-rebound tacky rubber center tread, with high-tack rubber on side knobs - Tubeless-ready design
e*thirteen by The Hive LG1 Race 29-inch
$89.99
The LG1 Race tire shares the same tread as the TRS, in a downhill-ready dual-ply design. Tapered Apex inserts designed into the tire, combined with a layer of woven aramid reinforcement to protect against sidewall cuts, increasing grip under cornering and braking, while decrease rolling resistance. - Aggressive tread pattern with a structural, angled base on the side knobs to control tire roll under high-speed cornering - Sipes are positioned to provide confident transitions from straight lines to cornering and confident braking traction - Ramped, shorter center knobs keep LG1 tires rolling fast - Race tire features a dual-ply design with slow-rebound tacky rubber center tread, with high-tack rubber on side knobs - Tubeless-ready design
e*thirteen by The Hive Plus Pedals
$186.99
e*thirteen's Plus pedal features a lightweight aluminum pedal body and 22 traction pins. - Lightweight aluminum pedal body - 22 traction pins - 9/16"
e*thirteen by The Hive e-spec Race Bosch Gen 4 Crank
$474.99
The e*thirteen e*spec Race Carbon Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These carbon crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront. - An 8mm self extractor bolt is built into both arms for easy removal - World-Cup DH-rated layup and construction - Compacted carbon fiber with an additional 3k added to front and rear faces of crank for impact resistance - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Designed for ebike: Yes - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount Bosch - BB Included: No
e*thirteen by The Hive TRS Race Crankset
$538.99
e*thirteen's TRS Race carbon crankset is crafted from lightweight components, so you can hit the trails at full speed. - Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings - Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance - Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation - The adjustable chainline accommodates non-Boost (142mm), Boost (148mm), and Super Boost (157mm) - Compatible with e*thirteen's SL Guiderings (28-38t options for non-Boost and Boost frames) and UL Guiderings (30-42t options for Super Boost frames) - Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92 - Number of Chainrings: No Rings Included - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: e*Thirteen P3 Connect - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount e*Thirteen - BB Included: No
Zipp End Plug Vuka Extension
$8.49
Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions
Zipp Disc Wheel Valve Cover Patches
$8.99
A simple solution for completing the Zipp aerodynamic package by covering the valve access hole on most disc wheels. Black, self-adhesive oval patches with the Z logo, in a package of five.
Zipp End Plug Cable Guide Vuka Extension
$9.99
Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions
Zipp Service Course Bar End Plugs
$9.99
ZIPP Service Course Bar End Plugs, Qty 2.
Zipp Zipp Tangente Valve Extender - Threaded Core
$12.00
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
Zipp SL Speed DI2 Battery Mount
$15.99
Designed for use with the Zipp SL Speed Seatpost; an internal mount to hold a Shimano DI2 seatpost battery. - Mount compatible only with B1 SL Speed seatpost - Weight: 18g for 27.2mm, 19g for 31.6mm
Zipp Sapim CX-Ray Straight Pull Spokes and Nipples
$17.00 - $23.99
- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs
Zipp Stem Top Cap and Bolt
$19.99
Zipp's Stem Top Cap and Bolt are designed to work specifically with Zipp stems. The eight-gram aluminum cap and nine-gram-bolt are the same as those used on bikes built for Zipp-sponsored professional teams. The bolt has a T25 Torx head for ease of adjustment and so you need only one tool for your Zipp cockpit.
Zipp Tangente Valve Extender
$19.99
Zipp's Tangente Valve Extender is for use with Zipp butyl inner tubes and Zipp Tangente tubular tires with removable valve cores; and other leading tubular tires and inner tubes that have removable cores. It lengthens the valve so that it protrudes far enough from deep-section aero rims/wheels so that you can attach your pump to inflate your tire. This extender is made of lightweight aluminum, has a threaded tip for you to screw in your valve core so you can still seal the valve, and it is made with the same attention to detail that's built into Zipp's wheels and other products.
Zipp Zipp Tangente Valve Extenders - Removable Core
$19.99 - $43.00
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal
Zipp 77/177 Disc Conversion Caps
$25.99 - $32.99
Zipp Speed Weaponry Hub Conversion Caps
Zipp Decal Set
$29.99
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
Zipp Vuka Clip Riser Kit
$32.99
Zipp's Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip’s above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system. - Sold in pairs - Risers cannot be stacked - Includes hardware
Zipp Vuka Clip Riser Kit
$33.00
Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip's above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system.
Zipp Vuka Alumina Clip Armrest Pad Kit
$34.99
- Includes 2 replacement pads and Velcro - May be used with the older Vuka Clip and Vuka Aero - Elbow pads embossed with Zipp brand logo
Page 1 of 92 Next page