Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

3T Extension End Plugs
$9.99
End-plugs with opening for cable pass-through for aerobar extensions.
3T Arx II Team Bolts Kit
$49.99
Set of 5 Torx bolts for faceplate and steerer clamp, for Arx II stems.
3T S-Bend Alloy Aerobar Extensions
$74.99
- Use in conjunction with Clip-On Team or Pro Aerobar base units - Aluminum extension pair with 22.2mm diameter - 305mm maximum extension from centerline of bar clamp
3T S-Bend Extensions Pro
$74.99
3T's S-Bend Aero Extensions are made of durable, stiff aluminum and feature ergonomic bends to keep your wrists comfortable during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
3T Straight Extensions Pro
$74.99
3T's Straight Aero Extensions are made of durable, stiff aluminum and feature no bends for an ultra low position during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
3T DiffLock Mechanism with Oval Rails 9x7
$89.99
DiffLock mechanism complete with bolts, endcaps fit oval saddle rails 7mm x 9mm.
3T Vola/Revo Team/LTD Clamp Kit
$94.99
Pair extension clamps and fixings for Vola Ltd and Vola Team.
3T Brezza II Riser Kit - 10/20mm
$104.99
Riser kit comprises risers (2 x 10mm, 2 x 20mm), conversion plates, and bolts for Brezza II, to adjust armrest and extension height by 10mm, 20mm, or 30mm. - Material: Alloy - Bolts: Steel
3T Apto Team
$144.99
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts (Titanium in case of the TEAM version) securely hold the stem in place.
3T Vola Pro Clamp Kit
$144.99
Replacement clamp kit for Vola PRO and Clip on Pro/Team aerobars.
3T Zero25 Pro
$149.99
Zero25 is a lightweight, universal seatpost with a twist: it's two seatposts in one. The two clever, reversible saddle rail clamps transform the post from zero saddle setback to 25mm setback. All that's needed is to flip the clamps from one side of the seatpost head to the other and the offset changes. No more problems with getting the wrong seatpost or needing another one when you change the type of saddle you use—it now takes 30 seconds to transform your seatpost. And, the best news is that, despite the double functionality, the Zero25 is even lighter than our previous seatpost. Zero25 Pro has an alloy pillar and is 350mm long.
3T Straight Extensions Team
$152.99
3T's Straight Aero Extensions are made of light, stiff carbon and feature no bends for an ultra low position during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
3T Apto Team Stealth
$153.99
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts (Titanium in case of the TEAM version) securely hold the stem in place.
3T Comfort Cradles and Pads Kit - Carbon
$162.99
Comfort armrest set comprises pads and cradles and was original equipment on Ventus, use to upgrade Aura, Brezza II Team, and Mistral.
3T Compact Cradles and Pads Kit - Carbon
$162.99
Compact armrest set comprises pads and cradles for Aura, Brezza II Team, Mistral, and Ventus.
3T S-Bend Extensions Team
$170.99
3T's S-Bend Aero Extensions are made of light, stiff carbon and feature ergonomic bends to keep your wrists comfortable during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
3T Wrist Comfort Bend Extensions Team
$170.99
3T's Wrist Comfort Bend Aero Extensions are made of light, stiff carbon and feature large ergonomic bends to keep your wrists as comfortable as possible and ensure a sturdy grip during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
3T Arx LTD
$354.99 - $374.99
Arx, Latin for stronghold and bridge, is 3T’s race-proven design for the perfect connection between fork and handlebar and suited to all cycling disciplines. Clamp design is optimized to ensure a secure fit on composite steerers and bars without the need for potentially damaging high torque values during assembly. 3T inhouse tests show Arx’s clamp by far exceeds the CEN standard, and also that it works very well with other brands of handlebar. Arx Ltd is the carbon-fiber version of the stem, with Ti bolts. Super-light and super-stiff, it is a highly evolved, modern design weighing just 118g.
3T Superleggera Team
$469.99
Superleggera, the lightest 3T drop bar, ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 186g - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Superleggera Team Stealth
$495.99
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 186g - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Luteus Team
$596.99
3T's Luteus Team is an all-carbon cyclocross fork designed for use with disc brakes. It features include a tapered steerer and aluminum-faced fork ends for precise handling and simple wheel changes. It supports brake calipers for use with standard 160mm brake rotors. The left fork blade is reinforced at the brake mounting pillars to compensate for the stresses imparted by disc braking. On its outer face, there is a recessed channel with two integrated fixing points for tidy brake cable/hose management. Plus, the fork ends face forwards and have aluminum inserts to better resist the lateral stresses transmitted through the hub by rough terrain.
3T Vola Team Stealth Essential
$649.99
Vola Team Stealth Essential is a lower-cost model of the award-winning Vola range. It's a complete starter package sharing the same architecture as Vola Team and based on the same 38cm-wide carbon fiber basebar. A super-low position favored by crono specialists is possible with extension clamps mounted on the underside of the basebar. Alternatively, extensions can be mounted above the basebar. Arm pad stack height above the stem centerline ranges from 30mm in the low position to 67mm in the top-mounted position. Width between the new comfort arm pads ranges 220–340mm, measured at pad outer edge. Arm pad reach can be set 20–70mm ahead of the basebar center, measured at pad front edge. Package includes alloy S-bend extensions, width extenders, and stiffness bridge. Riser kits, available as 3T spares, further raise stack height by up to 30mm. All-up weight of Vola Essential is just 700g. Finish with Team Stealth graphics.
3T Revo Team
$846.99
The bullhorn bar was introduced to the cycling world by 3T on Francesco Moser’s hour record bikes. Its design principle hasn’t significantly changed since, until now. The Revo seems so obvious, now, providing a better, safer and more powerful grip for the rider. Then again, good ideas always seem obvious after the fact. Revo is the first-ever aerobar to attach the basebar wing to the front of the grips instead of the back, literally changing aerobar design 180°. The advantages are clear: - The rider’s hands cannot slide forwards off the grips, so it’s safer and easier to use at all times - It offers better grip and handling on tough descents, rough roads and sketchy turns - It improves aerodynamics — the basebar wing has a sharper angle of attack with the free air flow than standard basebars - Wing material: Unidirectional carbon - Extension material: Alloy - Cradle material: Alloy - Pad material: Neoprene - Base bar width (c-c): 400mm - Outside pad width: 240-340mm - Center pad width: 130-230mm - Pad stack: 30-97mm - Pad reach: 20-70mm - Grip inside reach: 72mm - Grip drop: 46mm - Clamp diameter: 31.8mm - Extensions: S-bend - Cradle: New comfort - Weight: 770g (minimum stack) - Finish: Stealth black or black with red accents
3T Vola LTD
$999.99
Everyone's biometrics are different; no two cyclists should conform to the same TT set up. Comfort (we're talking about power-production) combined with aerodynamics, yields speed. You need the combined forces of both, and to do so you need to find your optimal position, which is why 3T designed their Vola LTD cockpit to be highly adjustable, not to mention light, stiff, and aero. - Narrow, aero-optimized base bars are built with 3T's HM carbon, cutting weight by huge margins - The super-low aero position favored by time trial specialists is possible with extension clamps mounted on the underside of the base bar - Arm pad stack height above the stem center line ranges from 30mm in the low position, to 97mm using all the included spacers in the top-mounted position - Width between the arm pads ranges 220—340mm, measured at pad outer edge - Arm pad reach can be set 20—70 mm ahead of the basebar center, measured at pad front edge - The arm pads rotate in their clamps -A reinforcing bridge is included for rigid, shake-free set-up, that can also double as a convenient computer clamp - Carbon aero extensions - Carbon base bars - Carbon 3T Comfort Cradles with neoprene pads - Weight: 750 grams in the "low position" - UCI legal
45NRTH XL Concave Carbide Aluminum Studs (100 pack)
$74.99
45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - Sold in a pack of 100 - XL Stud features a larger carbide tip diameter for increased traction
45NRTH Xerxes Studded Winter Tire
$109.99
Conquer ice, conquer snow, conquer winter riding! Commuting to work or school on ice just got faster and easier with 45NRTH's Xerxes. 140 steel-carbide studs provide unrivaled control and durability, while the ultra-narrow profile easily slices through snow to provide extreme traction in every winter condition.
45NRTH Gravdal
$134.99
Welcome to the world of high-performance commuter tires. 216 studs are carefully positioned across the casing profile to yield a level of confidence and safety never before seen in a commuter tire. Siped tread lugs and oval-shaped stud groupings provide exceptional cornering, braking, and acceleration traction. Run the Gravdal at minimum pressure for unmatched traction performance, and maximum pressure for a quieter and faster ride on clean roads. Works great with linear-pull and canti-lever brakes. - Siping creates a more conforming lug for added traction - Steel carbide studs provide traction in the iciest conditions
45NRTH Gravdal
$134.99
Welcome to the world of high-performance commuter tires. 216 studs are carefully positioned across the casing profile to yield a level of confidence and safety never before seen in a commuter tire. Siped tread lugs and oval-shaped stud groupings provide exceptional cornering, braking and acceleration traction. Run the Gravdal at minimum pressure for unmatched traction performance, and maximum pressure for a quieter and faster ride on clean roads. Works great with linear-pull and canti-lever brakes.
45NRTH Kahva 29-inch
$159.99
From light winter trail riding to commuting, the Kahva allows you to carve your way through winter with steel carbide studs as well as single, double, and triple-siped lugs.   - Siping on center and side lugs allows them to conform to terrain better for increased grip in any riding conditions - Steel carbide studs provide traction in the iciest conditions - Directional lugs provide low rolling resistance while offering excellent braking traction
45NRTH Kahva 29-inch Tubeless
$239.99
From light winter trail riding to commuting, the Kahva allows you to carve your way through winter with concave carbide studs as well as single, double and triple siped lugs. - Siping on center and side lugs lets the Kahva conform to terrain for increased grip in any riding conditions - Concave carbide studs provide traction in the iciest conditions - Directional lugs provide low rolling resistance while offering excellent braking traction - 252 carbide aluminum studs - 60 TPI
Page 1 of 94 Next page