Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Riser

Chromag BZA 35 Riser Bar
- Unidirectional carbon fiber riser bar with 35mm stem clamp area - Downhill strength with a 25% weight saving as compared to aluminum - Premium quality unidirectional carbon weave - 25% weight saving over aluminum - 5° upsweep, 8° bend - 235g
Chromag Fubars Cutlass Riser Bar
Chromag's Cutlass bar crosses categories from XC to Enduro with a 31.8mm diameter and width of 750mm. 215g of premium quality unidirectional carbon fiber ensures that this bar is about reliable strength and durability with a responsive feel. It features an 18mm rise for aggressive rider position tuned with a 5° upsweep, 8° bend orientation. - Premium quality unidirectional carbon weave - 5° upsweep, 8° bend - 215g
Chromag Fubars OSX Riser Bar
- Super-wide Enduro/Freeride/Downhill riser bar - Sweep: 5-degrees up, 8-degrees back - Made with custom drawn double butted 7000 aluminum
Salsa Rustler Bar 1 Carbon
Hold onto your sense of off-road adventure with Salsa's Rustler Bar 1. This strong, lightweight carbon handlebar features a 740mm width with a 15mm rise to put you in an hard-charging position both up and down.
49°N Steel Repair Bar
$15.99
- 25.4mm bar clamp - 620mm width with 10 backsweep
Dimension High-Rise
$29.99
An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes. - Four rise options available from 30-100mm - AL-6061 aluminum alloy - ISO4210 Safety Tested for City/Trekking use - Not recommended for use with bar-ends or clip-on aero bars - 15-degree sweep
Bontrager Approved 31.8 MTB Bar
$49.99
Follow the trail wherever it leads with the super-strong alloy handlebar designed to stand up to the rigors of variable off-road terrain. The Bontrager Approved 31.8 alloy handlebar is shot-peened for durability and single-butted to save weight. Key features: - Single-butted, tapered-wall, 6061-T6 alloy construction - Shot peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization - Bar end compatible
Spank Spoon Bar
$52.99
- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos
Race Face Evolve Riser Handlebar
$65.99
- Designed for XC riding yet strong enough for AM adventures as well - Manufactured from cold drawn, seamless 2014 Aluminum - Shot peened for increased fatigue life - Gradual external swaging & internal taper give increased strength & durability without adding weight
Race Face Aeffect R Handlebar
$69.99
A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast. Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 9°
Spank Spoon 800 Bar
$71.99 - $82.99
Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike
Bontrager Race Lite Low Riser Handlebar
$86.99
Bontrager's Race Lite Low Riser bar is crafted from custom-butted 7050-T6 aluminum for great strength, stiffness and light weight. The shot-peened finish increases the fatigue life and adds a great look. Measurement marks on the clamping surface and grip area make it easy to set up your perfect fit. And you can make your ride distinctly your own with your choice of red, blue, gold or classic black.
Race Face Atlas Riser Handlebar
$89.99 - $104.99
Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep
Race Face Turbine Riser Handlebar
$89.99
- Butted alloy tube, cold-drawn and shot-peened to increase fatigue resistance - Intended use: XC, Trail and All Mountain - Bar Clamp Diameter: 31.8 mm - Bend: 9 deg - Weight: 290 g
TruVativ Descendant Riser Handlebar
$95.99
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Al-7050 - Width: 760mm - Backsweep: 7-degrees - Rise: 20mm - Upsweep: 5-degrees - Colors: Black
Spank Spoon 35 Bar
$97.99
A Spank-quality 35mm handlebar that won't cost you an arm and leg? Freeride-inspired all-mountain geometry makes the bar extremely versatile, and the Spoon 35 is rock-solid whether you live for trails or bike parks. 800mm wide, you can dial your fit as the Spoon 35 is adjustable to 740mm. - Cost-effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life - Length: 800mm - Dial your fit—adjustable to 740mm - Choose 25/40 - 35mm clamp diameter - 5° up x 8° backsweep - Recommended for: ASTM 5, All mountain, trail, free ride, E-Bike
Race Face Atlas 35 Riser Handlebar
$98.99 - $114.99
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep
Race Face Turbine 35 Riser Handlebar
$98.99
- Butted alloy tube, cold-drawn and shot-peened to increase fatigue resistance - Intended use: XC, Trail and All Mountain - 8 degree rearward sweep, 5 degree upward sweep - Bar Clamp Diameter: 35.0 mm - Material: Aluminum - Weight: 270 g (10mm) - Width: 760 mm
Bontrager Kovee Elite 35 MTB Handlebar
$99.99
- Oversized 35mm clamp diameter offers increased strength and minimal weight - Shifter and brake lever position lines for spot-on control setup - 4 degree upsweep and 9 degree backsweep optimal for XC and trail - 40mm of cut marks on each side allow for easy width customization
Bontrager Line 35 27.5mm Rise MTB Bar
$99.99
Large and in charge Key features - Oversized 35mm clamp diameter offers lighter weight and higher strength than 31.8mm diameter - Quad-butted, tapered wall, 7050-T6 aluminum construction - Laser-etched brake lever position lines for spot-on control setup
Bontrager Line Handlebar
$99.99
Change what's possible on the trail with a bar that can handle varying terrains and obstacles. The Line 35 gives you a stable base to work from as you weave through dense forests and launch off dirt jumps. - Oversized 35mm clamp diameter offers lighter weight and higher strength than 31.8mm diameter - Quad-butted, tapered wall, 7050-T6 aluminum construction - Laser-etched brake lever position lines for spot-on control setup
Bontrager Rhythm Elite Handlebar
$99.99
Bontrager's Rhythm Elite Handlebar is a stout, wide bar perfect for riders who face all sorts of terrain on all-mountain epic rides. It's made of custom-butted 7050-T6 aluminum, with a unique forming method that creates a super-optimized butting profile for an exceptional strength-to-weight ratio. The Rhythm is nice and wide so you have the width to easily pilot your bike through rock gardens and the leverage to crank out the biggest climbs. Plus, the 9-degree bend and 4-degree upsweep puts your hands right where they want to be. Dress up your rig with your choice of red, blue, gold, or black.
TruVativ Descendant 35mm Riser Handlebar
$99.99
Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendant geometry from TruVativ's best enduro rider’s input - Backsweep: 7° - Upsweep: 5°
TruVativ Atmos 7k Riser Bar
$100.00 - $100.99
The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9
TruVativ Descendant 35mm DH Handlebar
$103.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendent geometry from TruVativ's best enduro rider’s input - Backsweep: 9° - Upsweep: 5°
Pro Koryak Di2 Riser Handlebar
$104.99
The Koryak Di2 handlebar is constructed of strong AL-2014 double-butted aluminum and is ideal for AM, Trail, and XC riding. It features compatibility with Shimano Di2 cable and battery integration.
Spank Spike 800 Race Bar
$105.99
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos
Bontrager Line 35 MTB Handlebar
$109.99
A 35mm mountain bar that maintains a forgiving ride feel and maximizes strength with minimal weight. Large and in charge Line 35 is ready for any terrain and changes what's possible on the trail. It maintains comfort and control on any ride, and an oversize clamping diameter increases strength and decreases overall bar and stem weight while ensuring a compliant, forgiving ride. Proven sweep and convenient graphic markings help dial in the perfect setup. Product details - Oversized 35mm clamp diameter offers lighter weight and higher strength than 31.8mm diameter - Quad-butted, tapered wall, 7050-T6 aluminum construction - Laser-etched brake lever position lines for spot-on control setup
Evo Brooklyn Basket
$109.99
- Low-profile integrated handlebar-basket - Compatible with 31.8mm or 25.4mm stems - 6061 aluminum - Cargo surface: 230 x 335mm (9 x 13.1-inch) - Handlebar width: 650mm - Max Weight 10kg/22lbs - Comfortable 30-degree sweep
Chromag Fubars OSX Handlebar
$114.00
Chromag's original all-of-the-above riding style handlebar, the Fubars OSX is made with premium 7000 series alloy. Weighing in at a race-light 310 grams, it features a low profile rise, and dialed 5° upsweep, 8° backsweep orientation.
Page 1 of 3 Next page