Parts & Accessories
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
With this Tacx wireless ANT+ receiver for Android devices with a micro USB port, you can connect to devices that communicate via ANT+. For example a heart rate meter, speed and cadence sensor, sports watch, GPS device or bike computer. This enables you to keep track of your performance continually. It also allows you to link an ANT+ trainer to the Tacx Cycling app (tablet) or Tacx Training app (smartphone), or connect an older model Tacx trainer which only has ANT+ to your telephone, so you can train with the Tacx Training app and Tacx Cloud. The device you want to connect must have a micro USB port and Android 4.3 or higher. This ANT+ dongle is only compatible with devices that have USB On-The-Go.
The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds. The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store. The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers: - T1980 Bushido (ANT+) - T2020 i-Genius - T2050 Tacx IRONMAN trainer - T2060 Tacx IRONMAN Smart - T2080 Genius Smart with Upgrade Smart - T2170 i-Vortex - T2180 Vortex Smart with Upgrade Smart - T2240 Flow Smart with Upgrade Smart - T2780 Bushido Smart with Upgrade Smart
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
Don't miss out on any action! The Tacx GoPro bike mount can be placed on the handlebar or saddle to record everything that happens in front or behind you. Installing the bracket on your bike is very simple. After placing the mount on your bike, you can insert the camera into the holder easily and quickly and you are ready to record. - Easily switch between mounting options - Handlebar adapter can be used on road or mountain bikes - Saddle adapter works with 7mm and 9mm diameter saddle rails and is also compatible with the Tacx Mudguard - Compatible with GoPro HERO and HERO +, GoPro HERO 2, GoPro HERO 3 and 3+ and GoPro HERO 4 and 4+ models - Also suitable for any other camera with a base identical to that of GoPro cameras
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Minoura Training Accessories like the ANT+ Minoura Heart Rate monitor with belt is a fantastic complement to your favorite trainer or roller. - Pickup and transmit your heart rate data with a comfortable fit - Low energy ANT + (2.4GHz) wireless protocol - Minoura is an official ANT + Alliance member - Universal on every ANT + device - Net Weight: 67 grams (including battery) - Battery: 1 x CR2032
Minoura Training Accessories like the ANT+ Minoura Speed/Cadence sensor (SPD/CD Separate type) are a fantastic complement to your favorite trainer or roller. - Pickup and transmit the speed and cadence data - Separate type - Low energy ANT+ wireless protocol - Minoura is an official ANT+ Alliance Member - Universal on every ANT+ device
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. The Kinetic Traxle comes in 3 thread pitches: - T-2101 Coarse: M12 x 1.75mm - T-2102 Medium: M12 x 1.5 - T-2100 Fine: M12 x 1.00mm (Fine XL has the same thread pitch and is a longer version of the fine Traxle)
The Internal Chain Actuated Cone Cup is designed to work with chain actuated internal rear hubs, including Sturmey Archer. It also works perfectly with pre-2018 Brompton folding bicycles.
For use with T-002I, T-016, T-007, AND T-006C trainer models. A must for BMX, recumbents, and any bike with tires having an outside diameter of 16 to 22 inches. The small wheel adapter raises the level of the resistance unit of compatible Kinetic Trainers by up to three inches.
If you're really serious about your trainer sessions, check out Kurt Kinetic's Pro Flywheel. It attaches quickly and easily to your Road Machine or Rock and Roll flywheel (sold separately) for a total of 18 pounds. It takes your Kurt Kinetic trainer's already stellar real-road feel and ups the realism, which is a must for hard-core endurance workouts, like tempo and long distance rides. You'll also experience longer wind-ups when doing sprint intervals and a longer coast-downs.
This cone cup is designed to work best when used with the Kinetic Skewer included in the box with every trainer. - Each new trainer ships with one of the Slotted Cone Cups installed on the non-drive side of the trainer - When installing, be sure to place the cam-end of the skewer in the slotted cone cup
This cone cup is for quick-release bikes and is designed to work best when used with the Kinetic Skewer included in the box with every trainer.
This cone cup replaces the threaded cone cup on pre-2013 Rock and Roll trainers and is the mounting solution for carbon Trek Speed Concept frames that require a smaller cone cup on the drive side of the trainer than the pre-installed version. - Only compatible with the Rock and Roll trainer - This cone cup's smaller outside diameter fits makes it compatible with carbon Trek Speed Concept bikes (aluminum Speed Concept bikes are compatible with the Standard Cone Cup) - Use this cone cup on the drive-side of the Rock And Roll trainer (it is not necessary to replace both cone cups)
Thru-axle adapter kit for DRIVO II, DIRETO X, and TURNO trainers.
The ANT+ Micro USB adapter allows on-the-go devices (OTG), such as your Android phone or tablet, to connect to an ANT+ USB stick. Android OTG compatible devices require ANT+ Radio Service and ANT+ USB Service to be installed from the Google Play store. These services allow the adapter to work correctly with an ANT+ USB stick.
CycleOps' Magnetic Remote Shifter is for use with CycleOps' standard Mag trainers. It allows you to adjust the resistance without leaving the saddle and fits on your stem or handlebars.
When you need to transport your trainer, CycleOps' Trainer Bag is the most convenient solution. There is no need to worry about your trainer getting damaged when it's safe and secure on the way to your race or event.
Blackburn's Sweat Net protects your precious bicycle and components from the corrosive effects of perspiration as you log indoor miles. It's made of washable terry cloth and fits most bicycles. - Fits most road and mountain bikes
Page 1 of 1