Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Handlebar Grips/Tape

$36.00
- Thick and soft polyurethane based tape provides vibration-damping and comfort
- Durable and elastic tape with self-adhesive backing
- Includes plugs, finishing strips and enough tape for a full drop bar

$65.00
The 710 Tour and Travel Grip features a well thought-out shape, with the wings pulled down far, making the perfect combination of comfort and driving dynamics. The 710 user is a comfort-oriented mountain biker or a sporty trekking biker.
This relief wing, which is located at the very edge and deeply extends downwards, frees up space for securely grasping the grip body in all situations. The raised end of the grip externally nestles against the side of the hand, while the inside is somewhat more elevated. As a result, it specifically relieves the ulnar nerve, the median nerve, and the carpal tunnel.
The clamp is located on the inner side of the grip. This increases the shock absorption and comfort on the hand’s outer side. It is not compatible with twist grips.
Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber.
This grip is a bit more difficult to install because the clamping is inside and only on the inner third. Use a bit of brake cleaner to slip the grip onto the handlebar very easily and it tightens up very quickly.
- Weight (g) / pair: 238
- Diameter at Smallest Point (mm): 91, 101, 106
- Material: Proprietary Rubber Blend

$179.99
The TwistLoc remote and grip set maximizes efficiency and space, while keeping your hands safely on the bar. Twist to lock, push the button to unlock on forks, rear shocks or both in tandem.
- Curved “CRVD” vs. and straight “STRT” cable options (see photos for reference)
- Encouraged for XC, Trail, and Enduro usage
- Easy action - Twist to lock, push button to release
- Fixed grips included

$29.99 - $34.99
We can't promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all-new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter and long days in the saddle.
The Loam Grip features two contrasting patterns, and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip's surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design combats compound deterioration, ensures the grip is absorbing more vibration, and provides needed structure to support the additional body weight pressing down on this area.
The Loam Grip was purpose-built for Enduro/Trail riding, and with that in mind, picking the compound was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. We call this the "happy camper" blend because it strikes a balance between an ultra-soft material that wears too quickly and a harder compound that provides no tactile benefits.
- Diameter: Avg. 30mm
- Weight: 90g/pair
- Width: 133.5mm
- Durometer: 25A Happy Camper Compound
- Clamp Style: Closed End, single clamp

$29.99
We can't promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all-new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter and long days in the saddle.
The Loam Grip features two contrasting patterns, and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip's surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design combats compound deterioration, ensures the grip is absorbing more vibration, and provides needed structure to support the additional body weight pressing down on this area.
The Loam Grip was purpose-built for Enduro/Trail riding, and with that in mind, picking the compound was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. We call this the "happy camper" blend because it strikes a balance between an ultra-soft material that wears too quickly and a harder compound that provides no tactile benefits.
- Diameter: Avg. 30mm
- Weight: 90g/pair
- Width: 133.5mm
- Durometer: 25A Happy Camper Compound
- Clamp Style: Closed End, single clamp

$32.99 - $34.99
A low profile single lock on grip, designed to reduce arm pump and hand numbness. The Diamond knurled texture, with saw tooth finger ramps and a super tacky 20A compound provide ultimate traction. More traction means less death-gripping the bars and less arm pump. Our single lock has the profile of your favorite double lock-on. But to reduce hand numbness we've replaced the hard outer clamp with extra rubber for greater cushioning of your palm heel. Get all the benefits of an “ergonomic” grip without the city bike cruiser look!
SPECS
- Weight: 97g (Pair)
- Length: 136mm
- Diameter: 30mm

$45.99
ODI Bjorn lock-on V2.1 grips. Made from recycled post-industrial rubber from ODI's manufacturing, the Bjorn grips have an offset center to provide additional cushion without extra bulk.
- Made from recycled TPE rubber
- Single-sided lock on

$42.99 - $49.99
ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand.
- Offset grip design provides padding where it is needed most
- Variable knurl pattern provides comfort/traction where you need it most
- Version 2.1 Lock-On System
- Soft Pro compound for excellent shock absorption
- Reinforced soft ends for added durability
- Super slim profile

$42.99 - $45.99
The Elite Pro grips feature an ergonomic design that conforms to a rider's hands without feeling bulky.
- Single clamp design
- Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike
- Length: 130mm

$49.99
Two Southern California originals have teamed up to create a modern-day classic design. Featuring the classic Vans waffle sole pattern and constructed from ODI's proprietary grip compounds for a consistent feel that provides exceptional control in all conditions. Available as part of the patented Lock-On Grip System for guaranteed slip-free performance and simple installation. For MTB, BMX, ATV, and PWC applications.
- Iconic Vans Waffle sole pattern utilizing ODI's proprietary grip compounds
- Provides exceptional feel and control in all conditions
- Aluminum clamps secure the grip on both ends using a hex wrench

$67.99
- 2.5mm thick DuraSoft Polymer (DSP)
- Micro-chevron grip pattern for superior comfort, feel and control
- Ultra lightweight at 56 grams per set (82 inch length per roll)
- Includes plugs and finishing strips
- Dual color option: primary color transition at 33 inches

$65.98 - $65.99
Balance is the key to optimum performance in a stage race. Experience the perfect blend of grip and comfort that teams AG2R La Mondiale Pro Cycling Team, Lotto Soudal and Movistar Team use to win in the pro peloton.

$49.99
Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.

$49.99
Ergon's GA2 Fat is for riders with large hands or high demands for damping, offering extra thick circumference. The ergonomically optimized form allows reduced force while gripping, because the grip zones are matched to the hand, allowing greater control on demanding trails. The inner construction varies in thickness allowing for greater damping without loss of control. The GA2 Fat has a superb tactile feel, and the super soft, UV-stable rubber compound is exclusively manufactured in Germany for Ergon. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.

$52.49
More support with more comfort
Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed!
What exactly are the benefits of the wings on the grips?
The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist.
What is the carpal tunnel?
The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness.
The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence.
As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes.
The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!

$47.99 - $52.49
More support with more comfort
Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed!
What exactly are the benefits of the wings on the grips?
The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist.
What is the carpal tunnel?
The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness.
The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence.
As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes.
The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!

$57.99 - $59.99
The Ergon GE1 Evo is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.
- Length: 135mm
- Lock On: Yes
- Weight: 105g

$59.99
The Ergon GE1 Evo is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.

$59.99 - $69.99
The Ergon GE1 Evo Factory is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.

$57.49 - $69.99
The new GFR1 has a slim overall shape for maximum feedback, yet still provides an extremely high level of damping through the ribbed section under the palm. The lower gripping zone is aggressive to keep gripping forces at a minimum when lifting the front wheel.
- Shape: Round
- Lock On: Yes
- Grip Shift Specific: No
- Flange: No

$57.50
The original ergonomic grip – continually improved over the last few years. As the worldwide standard in ergonomic function, materials and quality, the GP1 has a new internal structure. More comfort is ensured by the three-part internal support platform with varying wall thickness. German-made rubber compound is of the purest quality. Forged aluminium clamps, unlike the pressed clamps preferred by the copies.

$72.49
The bar end of the GP2 has been re-engineered, and improvements made to the product – better ergonomics, function and a higher quality feel. The GP2 now has a bar end with an installation friendly clamping system – as do all Ergon bar end models. This makes fitting extremely simple. Carbon bar compatible.

$31.99 - $34.99
The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The Knuckleduster grips are an all day grip that allow you to keep it Pinned Wide Open at all times.

$46.10
Brooks Microfiber Bar Tape is manufactured from a synthetic textile which has been treated with a polyurethane coating for maximum resistance against abrasion and moisture, providing excellent durability. Included are a pair of Brooks Rubber Bar End Plugs.

$44.99 - $45.00
- 3mm microfiber handlebar tape
- Microfiber Bar Tape is manufactured from a synthetic textile which has been treated with a Polyurethane coating for maximum resistance against abrasion and moisture, providing excellent durability
- Kit includes: 2 strips of microfiber tape and 2 rubber bar end plugs
- Tape Length: 215mm

$34.99
Double Gel Cork tape pairs an extra layer of gel padding with classic, long-lasting cork for handlebars that feel comfortable and look timeless. It's easy to install, looks great, and feels even better.
- Ideal stretch for quick and easy installation
- Features twice the amount of gel for maximum comfort
- Finishing strips and reflective Bontrager bar end plugs included
- Non-adhesive backing
- Double Gel Cork Tape has a thickness of 3.0mm

$29.99
This classic bar tape combines the traditional feel of natural cork with the vibration damping power of gel for a comfortable ride feel and a clean aesthetic that will never go out of style. It's easy to install and comes with Bontrager finishing strips and bar end plugs.
- Gel tape with natural cork feel
- Ideal stretch for quick and easy installation
- Inner gel strip for extra comfort
- Finishing strips and reflective Bontrager bar end plugs included
- Non-adhesive backing
Page 1 of 9
Next page