Trailers/Strollers

Turn your 66" trailer into a 78" trailer. Widen your 66" wheel track and Crossbars by 13" with this kit. With 78" Crossbars you can carry wider loads, such as two 36-inch beam canoes or up to seven kayaks. - Upgrade your RACKandROLL 66" trailer to a 78" trailer - Comes with two 78" Crossmembers and two 78" Yakima Crossbars Product Specs: - Weight: 17.31 lbs. - Limited One Year Warranty

Make backing up your trailer a cinch with this 40" bright yellow fiberglass pole. This increases the visibility of the rear of your trailer for you and others on the road. Attaches to your trailer frame or crossbar easily. - 40" tall bright yellow fiberglass safety pole attaches to trailer - Makes trailer more visible at all times and is especially useful for backing up Product Specs: - Weight: 1.20 lbs. - Limited One Year Warranty

For the couple that loves to bike together, there's the SideWinder. Featuring a swing-out arm allowing one person to load a tandem bike with ease. Fork-mount style that won't interfere with most hatchbacks. Fits Yakima round or square crossbars only. - Swing-out arm allows one person to easily load a bicycle built for two - Simple, tool-free installation - Won't interfere with most hatchbacks - Padded cradle and quick-release straps protect bottom-mounted cables - Fits Yakima round or square crossbars - SKS Locks sold separately - One tandem bicycle up to 50 lbs at min of 24" crossbar spread Product Specs: - Weight: 18.50 lbs. - Dimensions: L 56.00 in x W 8.00 in x H 12.00 in - Minimum Crossbar Spread 24.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty

- For iGo Turbo and iGo Blast - Can be added to any seat with the use of four plastic clamps - The canopy front has zippers and can be rolled up for use on warmer days

The Trail-Gator Spare receiver Kit Headtube Attachment is a must-have if your Trail-Gator is going to be used on multiple children's (rear) bicycles. Makes swapping between bikes a snap. - Spare seatspost attachment (for the children's bike) for the Trail-Gator tow bar - Fits all Trail-Gator models including the 640020-640022-640023 - Allows the Trail-Gator to be attached to multiple juvenile bicycles quickly - Fits headtube up to 45mm (1.75")

- Axle Kit for Journey Trailer TX - Compatible with 12mm rear thru-axles under 180mm in length - Note: Choose the correct thread pitch, 1.0 / 1.5 / 1.75mm, to match your thru-axle

The elements are no match for your gear with Topeak's Journey Trailer and DryBag on your side. This all-weather hauler boasts a strong frame, fast-rolling 16-inch wheel, a highly-visible flag and a rain-beating fender, too. And it attaches to almost any bike via Topeak's included SlideLock quick release hitch. The included DryBag features waterproof construction, sonically welded seams and a water-repelling roll-top closure to keep your stuff safe and dry in any conditions. Inclement weather won't stand a chance.

The Trailer Yoke is for use with the Journey Trailer TX. It allows you to quickly and easily use the trailer on multiple bikes without needing to swap over the yoke.

Thule's Internal Hub Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with an internally geared hub.

Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

- 4 piece sleeve set for Adams Trail-A-Bikes - Includes new shim for oversized seatposts that fits 25.4mm to 35.0mm and beyond

• 4 times greater strength • Fits seatposts from 25.4mm to 35.0mm • Retro fittable to all 15mm block, horizontal pin style Trail-a-Bikes • Fits late 1998 to present • Comes with 4 shims

- QR Locking Hitch Pin for Adams Trail-A-Bikes