Filter By:
Staff Picks

$160.00 - $189.99
We've put in the miles to perfect our top-of-the-line Enduro Bib. New, lightweight breathable micromesh fabric quickly wicks away sweat. Lay flat straps and a new multi-density chamois provide all day comfort and support. Add to that three sweet rear pockets, two elastic thigh pockets and one zippered security pocket and you never have a reason to carry a pack again. Pairs best with anything that starts with Yeti Enduro.
KEY FEATURES
Breathable micromesh main fabric
Premium, multi-density, italian chamois, custom made for yeti
Three easy access back pockets with additional secure waterproof zip pocket
Two elastic side-leg pockets for trail essentials
Seamless bib straps
Silicone printed leg grippers for a stay-in-place fit
Main: 78% polyester 22% spandex, other: 100% polyester

$69.99
The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle.
FEATURES
10 rear loading Steel pins / side, with Nyloc nuts
DU plus cartridge bearing axle system
Thin leading edge chamfered design to deflect off obstacles
Wide platform design for increased stability
Contoured shape provides ultimate connected feel

$24.99
- Lightest and most versatile MTB mudguard available
- Uses hook and loop Velcro straps to attach to the bridge and lower legs
- Compatible with forward and double bridge fork designs and all wheel sizes

$379.99
Among the Manifest's extraordinary features is Spherical Technology, which utilizes a ball-and-socket design powered by MIPS, the market-leading brain protection system that helps to reduce rotational forces. Spherical Technology allows the outer liner to rotate around the inner liner during a crash and also eliminates contact with a hard-plastic slip-plane. In addition to leading head protection, the Manifest offers wide-open airflow thanks to the AURA reinforcing arch, which bolsters structural integrity while allowing air to flow into the massive Wind Tunnel vents. You'll also get a comfortable, secure fit with the easy fit and positioning adjustments built in to the Roc Loc Trail Air fit system and plush, antimicrobial XT2 padding for exceptional sweat absorption.
- Spherical Technology's Ball-and-Socket design, powered by MIPS, helps redirect impact forces away from the brain by allowing the outer liner to rotate around the inner liner during a crash. It also eliminates contact with hard plastic or slip-planes against the skin.
- Dual-density foam liners designed to address high- and low-speed impacts for more comprehensive energy management.
- Structural integrity is bolstered by the shatter-resistant and translucent AURA reinforcing arch that runs throughout the helmet.
- Integrated eyewear grippers help secure sunglasses.
- All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's MIPS-equipped helmets is to reduce rotational forces. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts.
- This visor features an adjustment mechanism that lets you move the visor up and down in indexed steps. These steps include three riding positions plus a high position for goggle storage above your brow. The design allows you to easily adjust your visor with one hand while riding.
- Pure silver is the secret ingredient that gives XT2 the power to provide natural, permanent anti-odor protection to keep your helmet feeling and smelling fresh.
- The integrated rubber goggle gripper on the back of the helmet helps to ensure that goggles stay in place even when you're getting rowdy on the trail.
- The Roc Loc Trail Air Fit System offers micro-adjustable fit adjustment, enhanced ventilation, and durable design that resists abrasion, scratches, and UV rays.

$184.99
The Ion Pro RT front bike light lets you ride with confidence at all hours of the day. The USB rechargeable light features 5 modes for day and night, and its compact design and adjustable hard mount make it easy to securely attach it to the handlebars of any bike.
Product details
- Ion Pro RT provides a powerful beam that lights up the full width of any road or trail
- 1300 Lumens via high-power CREE LED
- 1300LM-1.5hrs, 800LM-3hrs, 400LM-6hrs, night flash-26hrs, day flash 22hrs
- Connect with Garmin and Bontrager ANT+ devices for always on, battery status, and control
- Includes adjustable light mount that fits bars from 25.4-35.0mm
- Blendr compatible with helmet mount available
- Includes Ion Pro RT light, Adjustable hard mount, and micro USB charging cable

$499.99 - $549.95
3 years of REVIVE out in the market resulted in another benchmark product for BikeYoke: REVIVE 2.0. The new extralong 213mm REVIVE required a lot of re-thinking and re-engineering the whole chassis structure and since we think they deserve it, the shorter REVIVES will also get all the nice updates, and benefit from what was originally implemented only for the longest sibling of the REVIVE family.
Noteworthy updates of the REVIVE 2.0 include:
- One piece 3D-forged upper tube unit for improved stiffness and strength
- Fully hard-anodized pin seats in the upper tube for improved corrosion-resistance
- CNC-finished actuation lever for even smoother engagement
- New upper saddle clamp and saddle bolts with integrated conical washers for even simpler saddle installation
Wanna know more about the REVIVE? What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike?
BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off.
Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth. And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before.
To understand the benefits over other posts you have to know about the problems of many current designs first. Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced.
That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of.
The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play:
- Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand.
- This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike.
So, now one might already understand that:
- No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings.
- No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design
- The hydraulic system can be reset to “new” via the unique “REVIVE-valving”
- This means the hydraulic circuit is a very stable closed system and basically maintenance free.
Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability:
- Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play.
- Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes.
1 set REVIVE dropper post includes:
- 1x REVIVE Seatpost
- 1x cable housing 1500mm
- 1x inner wire 1700mm
- 2x housing endcap
- 1x barrel cable clamp
- 1x air valve adapter
- 1x Quick-Reset-Lever
- 1x remote (optional)
- 1x BikeYoke I-spec adapter or Splits Clamp (optional)
- 1 set titanium saddle bolts and nuts (optional)

$44.99 - $51.20
Warmth Without the Weight
Mother Nature has met her match with this low-profile glove engineered to keep you going fast in cooler weather. Get the perfect amount of insulation to block out damp, cool temperatures while maintaining exceptional dexterity and control of your bike. These work well for those cold trail exploring or maintenance days.
- Neoprene cuff gives a streamlined look while offering maximum durability and comfort
- Adjustable TPR wrist closure with hook-and-loop backing ensures proper fit
- Lightly insulated soft-shell top hand provides protection against colder temps
- Moisture-wicking microfiber interior provides the perfect level of insulation
- Reflective graphics on top of hand offer a clean look with improved visibility
- Single-layer Clarion palm for premium comfort and performance
- Silicone-printed palm graphics increase grip in damp conditions
- Integrated tech thread keeps you connected with your devices

$119.99
The TorqueSet is the perfect tool to upgrade your workshop. The TorqueSet provides all the important keys you need to work on your bike. The special click-mechanism gives you a precise adjustment of the torque and prevents you from tightening a bolt too loose or too tight. So, the perfect tool to keep your bike in top condition.
Torque tool with 1/4" drive adjustable with increments of 0.5 Nm.
Click-mechanism to indicate when torque setting is reached.
Individually calibrated by computer.
Protection case included.
Specifications
Hex bit driver (inch): 1/4
Hex size (mm): 3, 4, 5, 6, 8
Ratchet bit driver: Yes
Torque range (Nm): 2-14
Torx size: T25, T30

$84.50
The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System*, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish.
*EDC Tool Sold Separately
PUMP VOLUME
A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market.
FAST-ON HEAD
Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump.
EDC PUMP SPEC
2 Sizes: High Volume 100cc & Compact 70cc
1-1/4" dia x 7" for 70cc (32mm dia x 178mm)
1-1/4" dia x 10" for 100cc (32mm dia x 254mm)
100cc Pump holds EDC Tool & a 20g CO2 or EDC Tool & the Storage Capsule
Fast-On Head (Presta Only) - No threads or locking levers
Integrated CO2 Inflator
Fully Sealed, Weatherproofed Internals
Includes Bottle Cage Mount

$199.99
ONEUP CARBON BARS. Strong, lightweight & vertically compliant.
The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let us ride harder for longer.
The solution is our patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right.
Almost every other carbon bar on the market copies the simple tapered profile of an Aluminum bar. With carbon you can take advantage of more complex shapes to get a better performing product, so that's what we did. If you actually care about bar compliance, then you don't make a regular 35mm diameter bar. Sure you can try to "optimize" the flex slightly with layup, but geometry is king and you're fighting a losing battle.
The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone.
We bench marked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains.
Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right.
SPECS
Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up
Weight: 20mm Rise (220g)
Max Stem Clamp Width: 65mm
Max Control Torque: 5Nm
Minimum Trim width: 740mm
Colour: Black. Decal kits: Available in Red, Green, Blue, Orange, Purple & White
COMPATIBILITY
Grips with only an outer clamp are not compatible with our bar.
Page 1 of 1