Brass compression olive for Hope hydraulic disc brakes.

Brass hose insert for Hope hydraulic disc brakes.

Replacement pads for Hope E4 hydraulic disc brakes.

Brake Pads for your Dominion A2 come in 2 flavors: Sintered T100 - Sintered metallic friction material provides maximum stopping power in wet and dry conditions. Semi-metallic T106 - Friction material provides enhanced modulation and silent operation.

- 410 Stainless steel construction - (6) Black M5 mounting bolts - Weights: 68g (140mm) / 85g (160mm) / 112g (180mm)

- Forged alloy pad construction - Heat reducing finned design - Pad runs cooler increasing power - Organic Semi metallic material - 24.8g

The Campagnolo 03 rotors were designed to ensure optimal resistance to overheating, thus guaranteeing greater braking capability even in the most critical situations. - Designed to be used with Center Lock or AFS systems - Feature a rounded UCI compliant edge for safety and easy insertion into calipers

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter the Apex 1 HYDROR. Using SRAM's proven HYDROR braking system, the Apex 1 delivers quiet confidence on every ride. Mated to a HYDROR brake lever is a DoubleTap 11-speed shift lever, built to provide accurate shifting that you can rely on no matter where you ride. - SRAM Road ExactActuation 11-speed compatible - Uses DOT 5.1 brake fluid - Caliper available in both 74mm and Flat Mount versions - Lever body design offers excellent finger wrap, comfort and control - Easily converts between 160mm and 140mm rotors with adaptor brackets - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Two piston hydraulic caliper - Moto-style means this is a right-side (rear) shifter with a front brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

SRAM's Force 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and represents SRAM's attempt at perfecting braking performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again!

SRAM's Force 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precision braking and shifting performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. SRAM Force 22 is designed to work with 11-speed cassettes. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again!

SRAM's Force CX1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between cyclocross rider and bike, and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side, hydraulic-brake-only carbon lever is simple and effective. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust.

If you believe in better performance then you should believe in hydraulic road (HydroR) brakes. SRAM's award winning HydroR technology is the fulfillment of the promise of better braking, more control, and improved performance in all conditions. SRAM RED is delivering on the promise of braking confidence and security that brings speed control and stability to a new level. - RED ergonomics including Reach Adjust - SRAM Road 11-speed compatible - Optimized power and modulation for higher speeds and more control - Refined lever body design is more comfortable - Easy access bleed port means convenient service - Shift paddle design is lightweight and offers improved finger clearance - Moto-style means this is a right-side (rear) shifter with a front brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

SRAM's left-side Rival 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precise braking and shifting performance. The aluminum brake lever and shift paddle deliver smooth modulation and deft shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races and epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Rival 22 Hydraulics, you'll never go back to rim brakes again! - Hydraulic Fluid Type: DOT - Hydraulic Hose Length: 950 mm - Pad Compound: Organic - Rear Der/Shifter Compatibility: SRAM Exact Actuation - Rotor Included: No

SRAM's right-side Rival 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group offer precise braking performance. The aluminum brake lever and shift paddle deliver smooth modulation and deft shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. SRAM's Rival 22 right shifter is designed to work with a SRAM 11-speed cassette. The forged aluminum disc caliper is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races and epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Rival 22 Hydraulics, you'll never go back to rim brakes again!

Wireless shifting and the best hydraulic disc braking anywhere, plus revolutionary eTap shift logic. What more could you want? While we could have stopped there, we went further and optimized the hood shape to fit hands of all sizes for comfortable and controlled braking from any position. AXS technology means personalization is in your hands. - AXS-enabled for easy personalization - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - Optimized hood shape fits a wider range of hand sizes - Textured shift paddles and hoods for control and comfort - Reach Adjust to personalize fit for more hand sizes

Wireless shifting and the best hydraulic disc braking anywhere, plus revolutionary eTap shift logic. What more could you want? While we could have stopped there, we went further and optimized the hood shape to fit hands of all sizes for comfortable and controlled braking from any position. AXS technology means personalization is in your hands. - AXS-enabled for easy personalization - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - Optimized hood shape fits a wider range of hand sizes - Textured shift paddles and hoods for control and comfort - Reach Adjust to personalize fit for more hand sizes

SRAM's S-700 Shift Lever w/Hydraulic Disc Brake delivers pro-level shifting performance, excellent ergonomics, and the power and modulation of hydraulic disc braking. Feel the ergonomics and response of SRAM’s DoubleTap shifting as you drop a gear for that grueling climb or ratchet through the 10 speeds in that frantic sprint finish. Once you give the brake lever a squeeze, all that great shifting seems like icing on the cake. You’ll instantly notice that the hydraulic disc brake requires less hand force than a traditional cable-pull brake, and provides incredible power and modulation that makes every road or cross ride better.

RockShox Brake Post Kit for most RockShox forks. - Includes 2 posts & 2 washers

Profile's 3/One Aluminum Aerobrake Levers are light and supremely aerodynamic, the perfect complement to your cutting-edge triathlon or time-trial bicycle. They boast feathery, stiff, and ergonomic 1-finger aluminum levers with a composite mount, and internal cable routing capabilities for optimum aerodynamics (cables sold separately).

Profile's 3/One Caron Aerobrake Levers are light and supremely aerodynamic, the perfect complement to your cutting-edge triathlon or time-trial bicycle. They boast feathery, stiff, and ergonomic 1-finger carbon levers with a composite mount, and internal cable routing capabilities for optimum aerodynamics (cables sold separately).

Profile Design's carbon-specific brake pads are specially formulated to improve braking performance when you're using carbon rims. Profile Design's TwentyFour Series wheels require the use of these P220 carbon-specific brake pads.

- Mini-v brake for use with standard short pull (road) brake levers - Direct pull cantilever brake is simpler to install than a traditional cantilever brake and gives a narrow profile - Short curved arms give plenty of clearance for cyclocross tires or wide fenders - Spring tension is independently adjustable for each arm, so the brake can be precisely centered on the wheel and adjusted for return strength - Simple pivoting quick release on one arm makes it easy to open the brake to remove a wheel - Made in USA

- Reversible 6061 aluminum arms for left or right cable routing - Quick-release noodle is lined with Teflon for smooth action - High tension square wire springs - Thinline threaded pads with easy-to-adjust arm hardware - Made in USA

- Works well as a rear brake where the Neo-Retro may cause heel clearance problems - Compatible with drop bar levers and short pull mountain bike levers - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA

Made from super-stiff forged aluminum. Features a two-finger design lever for comfort and a hinged clamp for easy installation and removal. Available in multiple colors! Product Specifications - Size: 7/8" (22.2mm) - Bracket: Hinged - Material: Forged Aluminum - Side: Right (Rear) or Left (Front) - Weight: 3.4oz

This kit includes everything you need to set up a fresh set of brakes on your bike! Now includes the updated Cease V2 brake design. Product Specifications - Brakes: Mission Cease V2 - Lever: Mission Captive - Cable: Mission Capture - Weight: 13oz

Made from industry-standard diecast aluminum, featuring extra-wide brake arm bends for large tire clearance and low-profile spring adjustment caps for universal functionality. Includes a simple one-piece straddle cable hanger system, brake pads, and all necessary hardware. The updated V2 design gives additional clearance, and the flat brake arm profiles eliminate any chance of brake arm rub. Product Specifications - Type: 990 U-Brake - Material: Die-Cast Aluminum - Includes: Brakes, Bolts, Pads, Straddle Cable - Weight: 5.9oz

Made from super-stiff forged aluminum. Features a two-finger design lever for comfort and a hinged clamp for easy installation and removal. Product Specifications - Size: 7/8" (22.2mm) - Bracket: Hinged - Material: Forged Aluminum - Side: Left (Front) - Weight: 3.4oz

8 Series Disc Brake Pads - Disconnected two piece back plate - Performance compound offers excellent bite for strong braking response in a variety of conditions - Set of four disc brake pads for one MT5, MT7 Caliper

8 Series Disc Brake Pads - Disconnected two piece back plate - Race compound offers maximum stopping power for those who push their materials to the limits - Set of four disc brake pads for one MT5, MT7 Caliper

9 Series Disc Brake Pads - One piece connected back plate - Performance compound offers excellent bite for strong braking response in a variety of conditions - Pair of disc brake pads for one MT5, MT7 caliper

The HS33 R is the newest hydraulic safety rim brake in radial design in a portfolio of test-winning products. With its high braking power, reduced weight and perfect ergonomics, it makes an ideal partner for both road and off-road – and is equally suited for traditional, city and eBikes. Well worth a demo! - The improved legendary HS33 rim brake features a redesigned master cylinder and 2 finger lever blade - Full hydraulic rim brake system: closed design (no reservoir) - Mounts to cantilever/linear brake post studs (fork and/or frame) - Streamlined alloy brake lever assembly with integrated (TPA) Turbo Pad Wear Adjuster and integrated reach adjust - All hose fittings perfectly hidden with new designed caps - Compatible with all trigger and twist grip shifters - Full-hydraulic Magura mineral oil system with a 5-year leakproof warranty - Includes: flip/flop front or rear lever, 1350mm pre-bled (cut-to-fit) tubing, stud-mounted slave cylinders with mounting hardware, MC/lever, and manual (brake boosters included)

- Attachment parts for Magura OEM and braided-stainless hydraulic disc and rim brake tubing

- Reinforced hydraulic tubing designed for Magura mineral-oil fluid - Tubing kits are cut-to-fit with one pre-crimped 'fixed' end (90-degree on MT series and Gustav-M) and include one tubing reinforcement insert and compression ferrule/olive per kit - Sold each: (1) kit per brake - Bulk tubing is for RT series road rim brakes, HS-series rim brakes and Julie disc brakes: fittings sold separately - Choose black or white options for MT Next and MT series

Magura mdr-c disc brake rotor - 203mm 6-bolt for ebike silver The Magura MDR-C disc brake rotor is an ideal all-rounder – for city, trail and e-bikes. The improved lateral rigidity reduces vibrations and noise during braking, and also has improved heat resistance and increased stability. - Optimized for eBike use - Prepared for tone wheel or magnet - Wear optimized ring design

- Special patented interlocking of the outer and inner rings (Dovetail Interlink Technology) giving optimum braking performance even under heavy loads - In addition, maximum heat resistance and stability - E-Bike optimized - 6 steel mounting screws included

- An evolution of the MT line, the MT NEXT lineage of brakes is the next generation of braking performance - Carbotecture Body which is a proprietary carbon weave that is nearly twice as strong as carbon laminates, aluminum or magnesium - Carbotecture radial design master-cylinder/lever with 2-finger alloy lever blade and clamp with adjustable reach, flip/flop design, and EBT or Easy Bleed Technology port on reservoir - Double Arch forged 2 piston monoblock caliper design that features anti-heat, anti-drag, anti-squeal, and magnetiX brake pad system for easy pad replacement - Full-hydraulic Magura Royal Blood mineral oil system with a 5-year leakproof warranty - Includes flip/flop front or rear lever, 2000mm pre-bled tubing kit, 74mm post-mount caliper, MC/lever, alloy hardware, tubing shortening bits, and manual

No matter how difficult the trail terrain, Magura's 4-piston technology and novel new ergonomics in the brake lever give you a performance package which will fill you with confidence. The MT5 is also perfect for S-Pedelecs. The aluminium, two-finger brake levers are ergonomically perfect for your hands, allowing you to easily and accurately apply the braking power you need, even during long braking actions. Their use of Carbotecture technology in the brake handle housing keeps the MT5's weight down to a minimum and provides optimal braking performance. - An evolution of the MT line, the MT NEXT lineage of brakes is the next generation of braking performance - Carbotecture Body which is a proprietary carbon weave that is nearly twice as strong as carbon laminates, aluminum or magnesium - Carbotecture radial design master-cylinder/lever with 2-finger alloy lever blade and clamp with adjustable reach, flip/flop design, and EBT or Easy Bleed Technology port on reservoir - Double Arch forged 4 piston monoblock caliper design that features anti-heat, anti-drag and anti-squeal and magnetiX brake pad system for easy pad replacement - Full-hydraulic Magura Royal Blood mineral oil system with a 5-year leakproof warranty - Includes flip/flop front or rear lever, 2000mm pre-bled tubing kit, 74mm post-mount caliper, MC/lever, alloy hardware, tubing shortening bits, and manual

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

Magura olives (compression ferrule) bag/20 - Small parts used to install hydraulic hose for Magura disc brakes. - Compatible with Campagnolo H11 brake/shift levers

Magura Storm SL.2 Rotor - 6-bolt silver The Storm SL.2 disc brake rotor combines minimal weight with excellent braking performance. Perfect for sporty use.

• Aluminum backing with extended cooling fins help regulate brake system temperature • High performance organic compound

- High performance compound recommended for all-conditions - Alloy backing plate: 50% lighter than steel backing plate

Organic brake compound with aluminum back plate. Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material, the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel - Formula B4|Racing XC|Extreme FR/DH/B4/Team/PRO/SL model also compatible with Grimeca System 13

• High performance compound recommended for all•conditions • Alloy backing plate: 50% lighter than steel backing plate

• High performance compound recommended for all•conditions • Alloy backing plate: 50% lighter than steel backing plate

Kool-Stop disc brake pads designed for use with Avid/SRAM disc brakes. - Compatible with SRAM Guide RE and Avid Code R 2010-Current - Designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding - Sintered brake compound with brass back plate

The Campi Super Record Holder is a forged aluminum holder with dual pivot adjustment that houses Kool Stop's Dual Compound pads. These pads feature a rear set screw for easy pain free pad replacements. Comes with extra set of hardware to install on older Campi systems. Features: - Aluminum Holder - Water Grooves - Dual Pivot Adjustment - Dual Compound - Rear set screw - Additional hardware for older Campi systems Specifications: - Weight per pair: 34.6 grams - Overall length: 56.3mm - Pad contact width: 8.9mm

- Replacement pads for Campagnolo Super Record 11-speed groups - Black: standard compound designed for dry condition riding - Salmon: aggressive compound for wet weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping - Triple: Kool-Stop's most aggressive compound combination for controlled braking in all conditions - Carbon - Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Carbon 2: updated formula for carbon rims, withstands steep descents with reduced wear

The Continental is Kool-Stop's classic conventional design, for use on older bicycles or brake systems with clearance problems. Great for City Bikes and steel rims. Features: - Internal backbone - Nyloc retaining nut - Thicker pad Specifications: - Weight per pair: 41.6 grams - Overall length: 45.5mm - Pad contact width: 9.4mm

Kool-Stop's sleek, lightweight cross pad with their triple compound technology is a great choice for competitive cross bike racers. Features: - Forged Alloy Holder - Triple Compound - Lightweight Design Specifications: - Overall length: 54.5 mm - Pad contact width: 7.5 mm

The Dura2 insert is a newly designed road pad. The pad is thicker than the standard Dura type for longer life, has a 7.65 mm contact width for narrow rims and cut outs for reduced weight. - Water grooves - 7.65 contact width - Reduced weight - Rim Friendly Compounds

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistant braking power. - Qty 1 = enough for 1 wheel