Parts & Accessories

- Dispenser of Presta valve adaptors - Bottle of 50

Designed for high pressure tires (over 70 PSI) -Ultra durable plyurethane

- Includes 6 self-adhesive patches (25mm) and sand paper to scuff the tube surface for proper adhesion - Suitable for all kinds of punctures - Convenient plastic case is compact and easy to carry on every ride - No glue needed

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

Bontrager's latest TLR sealant seals faster, lasts longer, and provides better air retention so you have a better tubeless experience with easier setup. The ammonia-free formula won't corrode rims or degrade tire rubber, and it provides permanent repair for punctures up to 6.5mm. Product details - Improved flat protection seals punctures faster - Increased air retention holds air longer with 3x less air loss than the original - Compatible with all TLR tires for use on road, gravel, and mountain bikes - Ammonia-free mixture won't corrode alloy rims or degrade tires - Effective in temperatures ranging from -5 to 120 degrees F (-21 to 49 degrees C) - Cool new blue color - Use with Bontrager TLR wheels, sealant, and rim strips for a complete tubeless system designed and tested to work together - Can be used in tubes to help seal punctures

- Available in 1.5mm & 3mm plug sizes. - 6 plugs per pack, in 2 sheets of 3 plugs - Designed to fit perfectly into the body of Peaty’s Holeshot Tyre Puncture Plugger tool - Packaged using recycled cardboard header cards and biodegradable bags

Give your tires a little personality. Your friendly reminder to pump up those tires. - Fashion or function, it's up to you to decide. - Simply screw onto your standard valve for instant bike rack cred. - No tools required for installation - Set of two valve caps

Knurled 6061 aluminum valve caps for a little touch of swag. - Material: Knurled 6061 Aluminum - Valve Type: Schrader

Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).

The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products. - Tire studs sold separately - POM-injected handle - Stainless steel barrel - Thumb and index finger grips for more comfort and control - Compatible with studs that have a 3.5mm or smaller shaft

Made from high-quality polyester that is light, yet withstands high pressures. The special adhesive prevents slipping under high loads and temperatures. Pair-set with valve hole. - Max: 145 psi - Sold in pairs (boxed)

- Shim adds support to Presta stem used in a Schrader rim

Continental's Easy Tape Rim Strips are 20mm wide and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes they quick and easy to install. Just stretch them over your rims and let them snap in place! Each box contain a pair of rim strips.

- Steel Presta valve adapter, allows the use of a Schrader air nozzle to inflate a Presta valve - Includes a chain attachment, to fasten the adapter on a floor pump

- For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

Developed alongside World Cup mechanics and world champion racers. Peaty’s Holeshot Tubeless Sealant is packed full of biodegradable fibres & sealing particles to give a fast and strong seal. Using the latest fast-acting latex, our water-based sealant is ammonia-free, non-hazardous and lasts up to 6 months in the tyre in temperate climates*. It won’t ball up in the tyre and is easily washed out. Our biodegradable fibres and particles bind together with the fast-acting latex to create a clot (like platelets in your blood) to quickly & effectively seal holes and tears up to 6mm. Key Features: - Biodegradable sealing fibres - Biodegradable platelets - CO2 compatible - Seals up to 6mm holes - Operating pressures: 15 to 120 psi - Operating temperature: -20°c to +50°c - Seals porous tyres and bead/rim gaps setup Setup Instructions: Always ensure you have tubeless ready rims and tyres. For best results use with Peaty’s Tubeless Rim Tape and Peaty’s Tubeless Valves. 1. Shake the bottle vigorously before every use to ensure an even distribution of fibres and particles. 2. Rinse away any old sealant from the tyre and dry off completely. For brand new tyres degrease, rinse and dry the internal carcass to remove factory mold release agents and other contaminants. 3. Seat your tyre onto the rim and inflate initially with no sealant, using a track pump, inflator or compressor to pop the tyre bead fully onto the rim. 4. Deflate the tyre and, with the valve at the three o’clock position, use the flexible injector pipe provided to inject the desired amount of sealant directly through the de-cored valve. 5. Re-insert the valve core and re-inflate the tyre to desired pressure. 6. Distribute the sealant around inside the tyre by spinning the wheel and tapping the tyre on the floor. 7. Listen for any air leaks and orientate the wheel so that the sealant flows around the inside of the tyre to the area required. Continue doing this until you can’t hear any more air loss † 8. Wash away any excess sealant that may have found its way to the outside of the tyre or rim with water. 9. Check tyre pressures and ride! Recommended minimum quantities per tyre: - Road 30 - 45ml - CycloCross 60 - 75ml - 26” MTB 60 - 80ml - 27.5” MTB 70 - 90ml - 29” MTB 100 - 120ml For wider rim / tyre combinations and / or additional puncture protection we recommend adding up to 30ml more sealant to the above quantities * Always check sealant regularly and top up as required † If a seal can’t be made, add more sealant in increments as required

Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!

Tubeless Universal Valve—SRAM MTB - Removable Valve Core - Includes 1 tubeless valve & 1 valve core wrench Compatible With: WH-RISE-60-B1, WH-ROAM-30-A1, WH-ROAM-40-A1, WH-ROAM-50-A1, WH-ROAM-50-B1, WH-ROAM-60-A1, WH-ROAM-60-B1

- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions

For high pressure (Presta) valve with removable valve core. - Tubeless compatible - Valve core removal key included - Aluminum - 2 per set - 12g

This rim tape is crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Tape is designed for wider Plus and Fat wheels - Can also be used as a universal tubeless solution for non-Bontrager rims - Use only with Bontrager TLR rim valve with round base - Rim tape replacement is recommended if removed from the wheel - One roll is 5m (197") in length

- CNC machined 7075 alloy construction - Sealed base prevents high pressure leaking - Designed to work with Aero dish rims - 30mm, 50mm and 70mm available

Ultra-compact polypropylene case. Kit includes machined aluminum T-handle with combined reamer and insertion tool and five tire plugs. - Weight: 48g

A new and improved Tubeless Sealant Injector syringe supports the needs of modern tire sizes and the higher volume fill of sealant required, for a flat-free riding experience. The larger volume 150ml injector makes application of sealant simple, with no mess or waste of sealant. - Larger 150ml volume gives you the ability to inject sealant into today’s higher-volume mountain, gravel, and road tires with a single fill - New easy press-on adapter presses directly onto Presta and Schrader valve stems for quick fills without threading or additional parts - Patent pending top-fill, drip-free system features a cross-slit valve in the fitting paired with a unique air-relief channel in the injector body allows a precise fill of well-shaken sealant from the top for a convenient set-up with zero mess - Hose plug included for hanging on your workbench or mess-free storage in your toolbox

Laugh in the face of punctures with Muc-Off's super lightweight inner tube sealant! The No Puncture Hassle Inner Tube Sealant is easy-to-install, and the cutting edge molecules seal holes in tubes of up to 4mm, ensuring that your ride is uninterrupted. - Proprietary water-based non-hazardous formula developed specifically for use with inner tubes - Compatible with a wide range of tube sizes and bikes - suitable for commuter, folding, urban, touring, MTB and e-bikes - Works on multiple punctures - Lasts the life of the inner tube/tire - Contains cutting-edge molecules to help seal holes quickly and effectively; seals holes in tubes up to 4mm

Continental's Valve Extenders are made of durable aluminum and come in four sizes so you can attach your pump to your valve, no matter how deep your rims are.

Get unbelievable traction in even the slickest winter conditions by adding Bontrager Tire Studs to your stud-ready winter tires. The carbide tipped design provides biting traction with an easy to install, durable design. Key features - Carbide-tipped design provides long lasting and durable traction - Compatible with Bontrager stud-ready tires - Use Bontrager Tire Stud Tool for easy installation

The Lizard Skins Tube Strap is an easy way to stow a spare tube. The minimally designed Tube Strap is a lightweight on-bike storage solution for any rider. This versatile strap is made to securely attach under seats and other locations on bike frames. - On-bike storage solution - Inner sleeve to compress a tube - Silicone strips for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 1.3oz (37g)

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Vittoria introduces Universal Sealant, the new range of anti-puncture bike tire sealants designed for Road and MTB use. The formula of the sealant has been improved. Universal Sealant does not contain ammonia, repairs larger punctures (up to 7mm), acts faster, and is compatible with both Road and MTB tubeless tires and with any type of inner tube. It is easy to use thanks to its specific pour spout that allows the application of the sealant straight from the valve. Universal Sealant is the universal anti-puncture bike tire sealant.